EGR Valve

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: EGR Valve [Re: 5150] #791683 02/22/07 03:48 AM

Joined: Jan 2004

Posts: 24

aj2

Need a Spot

It seems like you could put bolt a thin sheet of metal between the tube and the exhaust - but why would you want to block off the EGR valve? Wouldn't this just make the combustion chambers hotter and potentially damage the engine?

Entire Thread
Subject	Posted By	Posted
EGR Valve	5150	02/22/07 02:47 AM
Re: EGR Valve	aj2	02/22/07 03:48 AM
Re: EGR Valve	87Toy4x4	02/22/07 04:49 AM
Re: EGR Valve	TimsToyo	02/22/07 03:03 PM
Re: EGR Valve	foxtrapper	02/23/07 12:02 PM
Re: EGR Valve	Stevie	02/25/07 05:31 PM
Re: EGR Valve	MAC	02/25/07 07:37 PM
Re: EGR Valve	Vanishing_Point	02/25/07 08:32 PM
Re: EGR Valve	aj2	02/26/07 03:22 AM
Re: EGR Valve	TimsToyo	02/27/07 03:56 PM
Re: EGR Valve	1986xtracab	02/27/07 04:11 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.474s Queries: 16 (3.471s) Memory: 0.6148 MB (Peak: 0.6478 MB) Data Comp: Off Server Time: 2026-06-03 14:12:20 UTC
Valid HTML 5 and Valid CSS