2002 Rodeo Idler & Tensioner Pulley Replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

2002 Rodeo Idler & Tensioner Pulley Replacement #792088 02/23/07 06:54 PM

Joined: Apr 2004

Posts: 95

Euclid, Ohio

SteveV

Getting the Wheeling Fever

Has anyone replaced your serpentine belt (alternator belt) pulleys and what did you use? I bought a Gates 38005 Tensioner pulley and a 38008 Idler pulley and both don't fit. The idler pulley has too large of a center hole and the tensioner pulley won't spin when bolted on.

Last edited by SteveV; 02/24/07 03:31 PM.

Entire Thread
Subject	Posted By	Posted
2002 Rodeo Idler & Tensioner Pulley Replacement	SteveV	02/23/07 06:54 PM
Re: 2002 Rodeo Idler & Tensioner Pulley Replacement	CPOM	02/24/07 02:12 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.638s Queries: 15 (3.636s) Memory: 0.5942 MB (Peak: 0.6272 MB) Data Comp: Off Server Time: 2026-06-15 22:47:37 UTC
Valid HTML 5 and Valid CSS