Break-in advice?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Break-in advice? #792161 02/24/07 02:18 AM

Joined: Apr 2006

Posts: 27

Washington

racerfan120 Offline

Getting the Wheeling Fever

Good day all! I will be wrapping up a rebuild here in the next few days, was just wondering if there is anything special to breaking in a motor with the 268 cam? Along with any advice to breaking in a motor in general? Thanks!

Entire Thread
Subject	Posted By	Posted
Break-in advice?	racerfan120	02/24/07 02:18 AM
Re: Break-in advice?	xrtim	02/24/07 04:40 AM
Re: Break-in advice?	PETE_YK	02/26/07 04:22 AM
Re: Break-in advice?	ChrisH	02/26/07 04:21 PM
Re: Break-in advice?	eastcoast	02/27/07 09:04 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.469s Queries: 15 (3.467s) Memory: 0.6004 MB (Peak: 0.6334 MB) Data Comp: Off Server Time: 2026-06-14 08:39:55 UTC
Valid HTML 5 and Valid CSS