Quote
I found a long time ago those measurements are an approximate. You could try longer shackles. You could move the back shackle hanger back. What I do now is just tack weld the hangers in place then set it on all fours. That way if I do not like the looks I can easily cut them off and reposition them.


I'll try to get pics up soon... We did just tack the hangers in place first and place the weight of the truck on the springs (weight of bed, empty plastic bed toolbox and space 33-12.50 tire + rim). the directions said the hangers should be at a 30 degree angle towards the back which they were. Then after everything was finished and the truck was back on the ground I jumped into the back of the truck and the shackles bottomed out to the rear...