2.6L Mech valve adj gap?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

2.6L Mech valve adj gap? #792668 02/25/07 11:11 PM

Joined: Jan 2007

Posts: 36

MotoXman

Getting the Wheeling Fever

Well Guys, the clearwater head is going on today and I need to know what gap i need to adj the intake and exhaust valves at? I decided to go mechanical instead of hydraulic and need to know what to adj them too.

87 Dodge Raider M/T 2.6L, Clearwater Head, Pacesetter Header, Weber Carb, Still working on it!

Entire Thread
Subject	Posted By	Posted
2.6L Mech valve adj gap?	MotoXman	02/25/07 11:11 PM
Re: 2.6L Mech valve adj gap?	fasteddy	02/26/07 12:38 AM
Re: 2.6L Mech valve adj gap?	MotoXman	02/26/07 01:15 AM
Re: 2.6L Mech valve adj gap?	fasteddy	02/27/07 12:41 AM
Re: 2.6L Mech valve adj gap?	MotoXman	02/27/07 05:35 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.488s Queries: 15 (3.486s) Memory: 0.6014 MB (Peak: 0.6343 MB) Data Comp: Off Server Time: 2026-06-12 21:45:12 UTC
Valid HTML 5 and Valid CSS