Stock rear cross member suitable for shock mounts?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Stock rear cross member suitable for shock mounts? [Re: Starchild] #792802 02/26/07 05:30 PM

Joined: Sep 2000

Posts: 4,277

Winston-Salem, NC, USA

RobG

Roll Me Over

I'd give it a go... I think it will hold. I ended up adding my own out of 2x2 because I wanted to raise things up a bit higher.

[Linked Image]

(for those wondering, he's talking about the round bar pictured below my inserted crossmember).

-Rob

Entire Thread
Subject	Posted By	Posted
Stock rear cross member suitable for shock mounts?	Starchild	02/26/07 03:10 PM
Re: Stock rear cross member suitable for shock mounts?	RobG	02/26/07 05:30 PM
Re: Stock rear cross member suitable for shock mounts?	Starchild	02/26/07 07:14 PM
Re: Stock rear cross member suitable for shock mounts?	paulevans76	02/27/07 04:21 AM
Re: Stock rear cross member suitable for shock mounts?	94rodeo	02/27/07 11:44 PM
Re: Stock rear cross member suitable for shock mounts?	Starchild	02/28/07 01:22 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.349s Queries: 16 (3.347s) Memory: 0.6043 MB (Peak: 0.6373 MB) Data Comp: Off Server Time: 2026-05-26 16:19:32 UTC
Valid HTML 5 and Valid CSS