of my custom rear bumper <img src="/forums/images/graemlins/shiner.gif" alt="" />

As many of you may recall, I was rear-ended a week or two ago by an F150 pickup at about 30mph. My custom bumper did great, however, the grill of the truck hit the bottom of my 35 inch spare tire mounted to my rear door. In turn, it cut the sidewall of my brand new 35x12.5" MTR <img src="/forums/images/graemlins/angry.gif" alt="" /> and bent my rear cargo door and spare tire mount (the spare tire is now angled slightly downward). His insurance is paying for everything ($2500) new tire, new mount, new door, etc. you can hardly even tell it is bent a little, but since I can't get my hands on the money directly, I am going to have the body shop replace the door anyway. If I could get the money, I would take it and bend my door back with a 2x4, but I will be getting it replaced anyway.

So, I had this made to fit in my 2" receiver. It takes about 5 seconds to take out to go 4wheeling, but protects my spare tire from getting hit on the road by <img src="/forums/images/graemlins/butwiggle.gif" alt="" />holes that like to rear end people. the body shop won't be replacing my door until march 26th, but like I said, it is hardly noticeable. Now with my rear bumper addition in place, I shouldn't sustain any damage to my spare tire or rear door in most cases.

[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]


97 Montero SR w/Mitsu Adj Shocks & Rear Diff Lock ARB Front Diff Lock 4.9 Ring/Pinion 3.15 transfer box 43:1 crawl ratio 2" suspen lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs 15x10 Wheels Rock Sliderz ARB front bumper w/12k winch Custom rear bumper