That does look pretty bad <img src="/forums/images/graemlins/butwiggle.gif" alt="" />!!!

While I don't want to dampen the excitement, but when this idea was mentioned before LandRaider expressed a concern about damaging or bending the frame should you be rearended again. I thought that was good thinking and I would be a little concerned, as that bar looks like it would have zero give, meaning all the force would be taken 'up the', oops I mean, 'by the' hitch receiver. Since you are bypassing the bumper isn't that likely to put the frame at risk?

What are your thoughts?


'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...