I knew the question would come up again, to be honest the only way my frame would get messed up would be if someone with a front bumper of similar strength hit me which isn't likely. Most stock cars and trucks are designed to crumble like tin cans when they are hit.

one other point I should make, my 2" receiver is welded in two spots to the actual rear bumper and then a third spot to the frame. the actual rear bumper is welded to the frame in 5 spots with re-enforcements in place. I wish I had a picture of the guys's truck after he had hit me, but I don't. his hood was crushed up about an entire foot, radiator totaled, and well, his front bumper kinda became one with the radiator, and that was with just the rear bumper, no addition was in place. most of the impact was taken on my bumper, just the very top of his grill hit the very bottom of my spare tire and just that little bit of force bent my door. this addition will keep the tire free of any impact even the tiniest bit. since the bumper handled the force before without even leaving the slightest ding, I don't ever see this as a problem. I am hoping that within the next month before I get my door replaced, that someone other poor fool rear-ends me, then I will really know if it works, but trust me, after my first rear-ended accident, it will. <img src="/forums/images/graemlins/mrt.gif" alt="" />


97 Montero SR w/Mitsu Adj Shocks & Rear Diff Lock ARB Front Diff Lock 4.9 Ring/Pinion 3.15 transfer box 43:1 crawl ratio 2" suspen lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs 15x10 Wheels Rock Sliderz ARB front bumper w/12k winch Custom rear bumper