|
|
|
|
 DANA Axles
#794054
03/03/07 01:31 AM
|
Joined: Aug 2006
Posts: 45
OP
Getting the Wheeling Fever
|
I recently purchased two rear Jeep Axles and I have a question about one of them. The one axle is a 89YJ DANA 35 with 4.11 gears and the one in question is a DANA with the following on it: 02-01-97 (the year made) 47415 264 8 I no this axle has good 456 gears in it and that is the reason I purchased them.
I purchase them for $200.00 and the question I have is did they increase the axle size that year because the axle tube diameter is much larger and so are the brake drums and pads?
The coil spring brackets are already removed from the 97 and the leaf spring brackets are welded on the 97 and all I need to do is bolt it on.
Any info would be appreciated,
Josephelk
Last edited by josephelk; 03/03/07 01:52 AM.
89 YJ, 3.5" Black Diamond Lift, 33" tires, 8000lb Warn, 4.0 91 XY engine swap.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.536s Queries: 15 (3.534s) Memory: 0.5985 MB (Peak: 0.6315 MB) Data Comp: Off Server Time: 2026-06-05 17:44:03 UTCValid HTML 5 and Valid CSS 
