Looks good. <img src="/forums/images/graemlins/cheers.gif" alt="" />

I've been paying attention to it as it is giving me possible ideas for micro RV project. My original thoughts on design are very close to what a Trekker is, but I want taller and an over cab extension. I'm now playing with the idea of making a steel roll cage frame and filling in the openings with insulated fiberglass panels.

Is the connection between the back and cab of the Trekker a hard interface with no give? I've been trying to figure out how to handle that area. My current idea is to have a flange where I can put a gasket seal with allot of small bolts to hold it together. There would be no real give in the joint. I'd cut a hole in the back of the cab that only leaves a narrow flange that will mate up to a flange on the front of the back. An EDPM gasket seal would be placed between the cab and back and many bolts would clamp them together.