removing outboard driveaxle *DELETED*

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: removing outboard driveaxle [Re: toyotaguy55] #794341 03/04/07 10:50 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Not sure on the IFS axles, but on the solid axle, there is a spring clip inside the CV that you need to drive off to remove the CV/birfied joint. The solid axle birf. won't fit the splines on your IFS locking hubs for sure.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
removing outboard driveaxle DELETED	fly_it_slow	03/04/07 05:00 AM
Re: removing outboard driveaxle	toyotaguy55	03/04/07 09:53 PM
Re: removing outboard driveaxle	4Crawler	03/04/07 10:50 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.501s Queries: 16 (3.499s) Memory: 0.5980 MB (Peak: 0.6309 MB) Data Comp: Off Server Time: 2026-06-14 04:17:50 UTC
Valid HTML 5 and Valid CSS