Quote

Seem to be having a problem as described on your site. just started this?
But can't seem to locate the connecter as in the pic
I have a 87 re truck
pump doesn't come on until I start cranking the motor
Shouldn't the pump cycle when you just turn the key on for a few seconds


Test jumper pins may be in the diagnostics box on the later engines (passenger side fender, B+ and FP pins) instead of a separate connector on the driver's side like the '85 has.

And yes, pump normally won't start until you hit the starter, that is normal (unless you ahve the test jumper installed).

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code