Driveshaft Bolts; need lock washers?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Driveshaft Bolts; need lock washers? [Re: J94_4runner] #794796 03/05/07 11:58 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

If I use washers there, I put them on the nut side. I think one of my flanges is too thick to use the washers, so just use the nuts as-is.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Driveshaft Bolts; need lock washers?	J94_4runner	03/05/07 11:30 PM
Re: Driveshaft Bolts; need lock washers?	4Crawler	03/05/07 11:58 PM
Re: Driveshaft Bolts; need lock washers?	J94_4runner	03/06/07 12:03 AM
Re: Driveshaft Bolts; need lock washers?	KiwiCowboy	03/10/07 06:47 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.809s Queries: 16 (3.806s) Memory: 0.6000 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-07-15 02:40:06 UTC
Valid HTML 5 and Valid CSS