Aisin Hub ID.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Aisin Hub ID. [Re: Adam F] #795035 03/06/07 10:34 PM

Joined: Feb 2007

Posts: 30

South Dakota

thorn4run

Getting the Wheeling Fever

OK, I've counted the splines and came up with 26. The body measures 1 and 3/8" from the mounting surface to the back of the dial cap. It uses the cone plit retainers and the mounting holes measure 3 1/2" across. I found a pic. of a Tacoma hub and it looks shorter that earlier Toyota hubs.
http://www.sonoransteel.com/aisin_manual_hubs.html

Last edited by thorn4run; 03/07/07 12:20 AM.

Entire Thread
Subject	Posted By	Posted
Aisin Hub ID.	thorn4run	03/06/07 07:52 PM
Re: Aisin Hub ID.	maxxis85	03/06/07 08:35 PM
Re: Aisin Hub ID.	OOP'S	03/06/07 09:01 PM
Re: Aisin Hub ID.	Adam F	03/06/07 09:45 PM
Re: Aisin Hub ID.	thorn4run	03/06/07 10:34 PM
Re: Aisin Hub ID.	thorn4run	03/08/07 05:31 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.384s Queries: 16 (3.382s) Memory: 0.6034 MB (Peak: 0.6364 MB) Data Comp: Off Server Time: 2026-05-31 14:31:33 UTC
Valid HTML 5 and Valid CSS