Definately get or make some plates for the frame, plus sleeves for the bolt holes. The solid axle p/s hoses will fit with the IFS box, may have to work with them a little to get them to fit. Also, likely need to extend the steering shaft depending on where the box is mounted:
- http://www.4crawler.com/4x4/ForSale/Docs/BodyLift_HowTo.shtml#RecirculatingBall

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code