Could I be bottoming out my Steering? Help

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Could I be bottoming out my Steering? Help [Re: LetsRodeo] #795779 03/12/07 05:18 AM

Joined: Oct 2003

Posts: 1,318

Monson, MA

chasespeed Offline

Body Damage is Cool

The droop stop on a second gen is a little metal bracket, if you are touching that, it will make a clunking sound... no worries...

I bet if you look up the upper control arm, you will see where that bracket was touchgin the the UCA....

Chase

Chase

Entire Thread
Subject	Posted By	Posted
Could I be bottoming out my Steering? Help	Veronica99	03/10/07 05:48 AM
Re: Could I be bottoming out my Steering? Help	Iluvmud	03/10/07 07:31 AM
Re: Could I be bottoming out my Steering? Help	LetsRodeo	03/12/07 01:55 AM
Re: Could I be bottoming out my Steering? Help	chasespeed	03/12/07 05:18 AM
Re: Could I be bottoming out my Steering? Help	Bansil	03/12/07 05:37 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.506s Queries: 16 (3.504s) Memory: 0.6008 MB (Peak: 0.6338 MB) Data Comp: Off Server Time: 2026-06-04 11:02:28 UTC
Valid HTML 5 and Valid CSS