Chris
For any serious wheelin one of the first priorties is sliders,so before summer is better than after.I just got finished talking to Ray and wer'e looking in to a Pismo
Rus possibly in April and you can do that and meet some of us Mitsu Guys if interested.
Russ <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/patriot.gif" alt="" />

Russ,
Meeting up in Pismo sounds like great fun.

I would like to have some sliders before the end of summer. I am really hoping to have BL and Springs in within a month and to get some sliders on soon after that. It is amazing how fast the list of mods starts to grow...

Chris

Since you drive a 94SR, I assume you have the rear locker. here is what you need to do the CON:
1. 2" BL
2. 33" tires
3. Rock Sliders
Suggested but not needed:
1. Remove rear bumper
2. Remove front bumper
I say this cause if you don't by the time you get out you will wish you did! <img src="/forums/images/graemlins/shiner.gif" alt="" />
There are more things required but usually someone in the group will have them! <img src="/forums/images/graemlins/kewl.gif" alt="" />
The CON should be done in a group, I personally prefer a MITSU group just for the fact that we tend to stick together like brothers and we know the limits of our rigs! <img src="/forums/images/graemlins/kewl.gif" alt="" />

Cap,

Yep I have the rear locker. Thanks for the info guys. I am waiting on a 2" Bl for 4crawler, and am planing on getting sliders form him as well. I Haven't figured out the bumper situation yet. I will have to look into some kind of bracket to raise the bumper once I get into. any suggestions?

For the ironman lift i chose to get some valley springs instead. Called up vsw this afternoon and should have them tomorrow afternoon if I can get off work early enough to pick them up. I e-mailed ironman of OZ and Canada 2 weeks ago about the product and never herd back form them. Could be because I wasn't going to order from them but I was still hoping for some information from them. Some one over on outerlimts said they only got 1.5" out of there lift from ironman, and every inch counts. I never really got the responses i was hoping for so I went with vsw and they are locale too. I hope to have them in this weekend. <img src="/forums/images/graemlins/smile.gif" alt="" />

Now to figure out the rear shocks.

thanks everyone for the help.

Chirs

I have a Gen1 1990 with an Ironman 2 1/2" lift on it.
I got it by chance from a guy in Az. It is great
you can really crank those torsion bars and the rear coils are really smooth. I was not able to use the shocks as they were the wrong mount type for my Gen1. I would recomend Iron Man - trouble free for me.