Torque specs on steering arms

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Torque specs on steering arms #796424 03/12/07 09:58 PM

Joined: Nov 2004

Posts: 408

SA/Texas

MnMsToY

Mudrunner

just want to conform that. From my understanding (FSM)it says 80 foot pounds of torque on the arm studs. Also says 71 foot pounds???? I went with a high steer get and didn't get any instructions. As for the pitman arm....I gave it all I could to torque that done.
Thanks,
Mike

Last edited by MnMsToY; 03/12/07 09:59 PM.

1980 Toy, Dovetail, Chevy 60/14, 5.13 gears "Wheeling isn't cheap anymore"
http://www.texas4x4.org/gallery/MikesToyota

Entire Thread
Subject	Posted By	Posted
Torque specs on steering arms	MnMsToY	03/12/07 09:58 PM
Re: Torque specs on steering arms	OOP'S	03/13/07 01:53 AM
Re: Torque specs on steering arms	MnMsToY	03/13/07 03:03 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.617s Queries: 15 (3.615s) Memory: 0.5967 MB (Peak: 0.6297 MB) Data Comp: Off Server Time: 2026-06-20 09:57:46 UTC
Valid HTML 5 and Valid CSS