Quote
just want to conform that. From my understanding (FSM)it says 80 foot pounds of torque on the arm studs. Also says 71 foot pounds???? I went with a high steer get and didn't get any instructions. As for the pitman arm....I gave it all I could to torque that done.
Thanks,
Mike
I just re-read the FSM and could not find anything about 80 ft lbs. All I found was 71 ft lbs unless you have the ARP from FROR then Brian recommends 100-110 ft lbs.

David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA

"Serenity through Sobriety"