844 spots left (out of 1,000).
And thanks for the reminder as I'd totally forgotten about ordering my passes!

still 844 available did u get mine Ray? <img src="/forums/images/graemlins/lol.gif" alt="" />
is that seven per order or site.
Russ <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/patriot.gif" alt="" />

I believe it's per order, not per site.

Nope. Wasn't sure if you were gonna make it. <img src="/forums/images/graemlins/lol.gif" alt="" /> <img src="/forums/images/graemlins/smile.gif" alt="" />

Seriously, I got a call in the middle of doing it and totally didn't even consider that. I just wanted to get it out of the way cause I know the next two weeks are gonna be very busy for me at work.

Sorry.

TRIP FLYER
Also for those who still haven't gotten my PM, here's the flyer I've sent to the list of attendee's. One change from my last PM is the inclussion of Chris who's not on this forum regularly, removal of your cell numbers, & the format.
This image should now easily print onto an 8.5x11 sheet of paper if you use the Letter page format. The image size should be just about 9.5x7" (hxw) and should print nicely on an 11x8 sheet of paper. Adjust your page margins or the image if needed to print it properly. <img src="/forums/images/graemlins/kewl.gif" alt="" />

My rig update: I FINALLY figured out why my rear axle is shifted to the left (enough that under mild suspension flex my driveshaft hits the gas tank!). The problem must have happened back in my holister carnage last year, where I snap'd my lateral bar, left shock, and various other parts. I must have also managed to bend the rear lateral bar mount (also known as pan-hard or track bar). Its such a clean bend that I didn't realize it this whole time. It was only till I had my Rodeo side by side w/ another Rodeo that I noticed the difference. The fix was simple and taken care of w/ a sledge hammer.

Now I just need to do the fuel pump/sending unit, trans pan seal, fan clutch, install new coils, crank t-bars, install new roof rack (and buy lights for the night run!), and set up my CB system.

Sorry for my jabber... Everyone around me is tired of hearing me talk about my rig and this trip

Someone start a countdown already!!

-Ashby

BTW before I forget, everyone please bring some a couple of pieces of firewood (24"x6"?). That should be enough for a nice bon fire for Saturday morning/eve & Sunday morning!

Ray.

Ok here is the deal. My wedding anniversary is May 1st so I'm waiting until after the 1st to get "permission" <img src="/forums/images/graemlins/lol.gif" alt="" />

Sure have a good laugh on me but all the married men understand. It's all about the timing <img src="/forums/images/graemlins/patriot.gif" alt="" />

BTW May 5th is Cinco de Mayo <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />

Good observation there Les. <img src="/forums/images/graemlins/ignore.gif" alt="" /> Mexicans celebrate the anniversary of the Battle of Puebla as Cinco de Mayo, a national holiday in Mexico.

Here is a short read http://www.history.com/minisite.do?...amp;display_order=4&mini_id=1099

A quick search for firewood on Craigslist yeilded several people giving away FREE firewood. Some are chopped and some are not so be sure to check.

Other than a "bonfire" Sat. night, are there firepits to have a fire friday night and Sat. morning also. Not just for warmth but for cooking and morning coffee etc..


-Ashby

Yup. CL is great for free firewood (Remove any nails, etc.

No fire pits though. It's sand all around where we'll be so essentially not flamable.

9 Days and counting!!

How is everyone coming along?

-Ashby