|
|
Re: New addition to the Family..89SWB Auto
[Re: justice]
#798641
01/20/09 03:40 PM
|
Joined: Apr 2006
Posts: 3,607
Roll Me Over
|
Yeah, that would be nice to have. I guess you might have better luck with the cheap bender if you used a spring or mandrel in the tube.
Good to know the dies aren't sized quite right for tube <img src="/forums/images/graemlins/kewl.gif" alt="" />
'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...
|
|
Re: New addition to the Family..89SWB Auto
[Re: justice]
#798642
01/20/09 11:15 PM
|
Joined: Nov 2001
Posts: 3,272
Roll Me Over
|
Justice, check Pirate. I've noticed a few for sale in the Tools section there.
73 -Jon KJ6GVM As seen on Expedition with TX plates: VEGETARIAN - An old Indian word for poor hunter Grampa's Trooper 1974 FJ40 1987 FJ60
|
|
Re: New addition to the Family..89SWB Auto
[Re: Oyaji_Jon]
#798643
02/16/09 07:35 PM
|
Joined: Oct 2008
Posts: 39
Getting the Wheeling Fever
|
I didn't see it covered in here, what width are your tires and wheels? I am assuming those are 15's and your sig says the tires are 33's. Your truck looks amazing!
|
|
Re: New addition to the Family..89SWB Auto
[Re: aaronmjr]
#798644
02/16/09 08:29 PM
|
Joined: Feb 2000
Posts: 3,269
OP
Roll Me Over
|
Thanks, 33"x12.50 on 15x8 AR Mojave rims.
99 Gen 2.5, fixing blown head gasket 89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD) Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB -Can Change a timing belt in my sleep..
|
|
Re: New addition to the Family..89SWB Auto
[Re: justice]
#798645
02/22/09 11:19 PM
|
Joined: Feb 2008
Posts: 57
Getting the Wheeling Fever
|
Very nice build justice, i built a similar front bumper out of i think 12in 1/4 thick C-chanel cut down to about 6 or eight wide. I should have used boxed steel like you, would have been way stronger but i had this laying around, i also built some rock sliders they hug and wrap around the rockers quite nicely i can get some pics up if you want. Are you using a 110v welder or 220v. Also did you crank the t bars any after the gen II coils, mine is soon to have a brand new 4.3 (sittin in the shop)and 36 swampers. kudos on the build
89 raider, 4.3l v6, 700r4 trans, 3in BL, Gen II springs, t-bar crank, Gen II UCAs, custom front bumper, 31-10.50 Baja Claws, Alum wheels
|
|
Re: New addition to the Family..89SWB Auto
[Re: HOLLYWOODTHARAIDER]
#798646
02/25/09 02:58 AM
|
Joined: Feb 2000
Posts: 3,269
OP
Roll Me Over
|
Thanks man, Still lots to do. Took it out on a trip last Sunday...From Anza Borrego out Oriflame Canyon. ![[Linked Image]](http://gallery.me.com/zone1wst/100041/oriflame1/web.jpg) ![[Linked Image]](http://gallery.me.com/zone1wst/100041/oriflame2/web.jpg)
99 Gen 2.5, fixing blown head gasket 89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD) Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB -Can Change a timing belt in my sleep..
|
|
Re: New addition to the Family..89SWB Auto
[Re: justice]
#798647
02/25/09 03:04 AM
|
Joined: Feb 2000
Posts: 3,269
OP
Roll Me Over
|
|
99 Gen 2.5, fixing blown head gasket 89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD) Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB -Can Change a timing belt in my sleep..
|
|
Re: New addition to the Family..89SWB Auto
[Re: justice]
#798648
02/25/09 03:06 AM
|
Joined: Jun 2002
Posts: 6,211
Trail Leader
|
|
'87 Raider 2.6 Turbo Auto, Under Construction '95 Montero SR, 35x12.5/15 BFG M/T KM-2's, Rock sliders, Qtr panel chop, gas tank lift, 2" BL, Aisins, 5.29s '95 Pajero Mini '98 Montero Winter Ed. '04 Cadillac XLR '03 Kawasaki ZRX1200R '60 Ford Falcon 4Dr
|
|
Re: New addition to the Family..89SWB Auto
[Re: JohnnyBfromPeoria]
#798649
02/25/09 03:14 AM
|
Joined: Feb 2000
Posts: 3,269
OP
Roll Me Over
|
Thanks, Here's a link to my 96 SR rear end install: 96 SR rear end into 89 SWB
99 Gen 2.5, fixing blown head gasket 89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD) Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB -Can Change a timing belt in my sleep..
|
|
Re: New addition to the Family..89SWB Auto
[Re: justice]
#798650
02/25/09 02:17 PM
|
Joined: May 2007
Posts: 4,628
Roll Me Over
|
|
Fasteddy's advice is occasionally sound...
|
|
|
|