Yeah, that would be nice to have. I guess you might have better luck with the cheap bender if you used a spring or mandrel in the tube.

Good to know the dies aren't sized quite right for tube <img src="/forums/images/graemlins/kewl.gif" alt="" />

'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...