OK jon here are the pics of the frame notch finnally:

Overall view cut an L shaped notch in the front of the frame horns. This retains the stock captive mounting bolt holes on the sides of the frame rails.

[Linked Image]

side view cut 1 3/4" back :
[Linked Image]

Front view: cut 1 3/8" down:

[Linked Image]

Dont forget this is for the 2" body lift. PLH you will need to cut strait down since you have no BL.

99 Gen 2.5, fixing blown head gasket
89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD)
Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB
-Can Change a timing belt in my sleep..