Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
distributor tooth wheel #799359 03/23/07 02:12 AM
Joined: Jan 2007
Posts: 15
H
hicojeeper Offline OP
Need a Spot
trying to replace the magnetic pick-up on my stock 258 distributor. tooth wheel is fighting me. do I need to use a puller, or will removing the tiny set pin let me get it off. I don't want to pry & bang then bend the shaft.


'80 CJ7; bored 258, weber, MSD, centerforce, rancho 2 1/2 lift, 32" BFG
Re: distributor tooth wheel [Re: hicojeeper] #799360 03/23/07 02:34 AM
Joined: Oct 2003
Posts: 7,768
BigJim Offline
Web Wheeler
Get a PUNCH the zact size as the pin and punch it out..the gear will come right off after the pin is pulled.
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />


professional bovine relocation specialist

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5856 MB (Peak: 0.6332 MB) Data Comp: Off Server Time: 2026-06-24 20:31:11 UTC
Valid HTML 5 and Valid CSS