flange removal thats above crossmember

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: flange removal thats above crossmember [Re: Adam F] #799575 04/05/07 05:40 AM

Joined: Mar 2007

Posts: 5

toysarefun Offline

Need a Spot

I removed the crossmember to get to the flange bolts because the bolts were just to tight. Tomorrow I get the tranny back from an $800 rebuild which apparently is a fairly good deal. Should I NOT be using Checker clutch rebuild parts for the truck or will they work out alright?

Entire Thread
Subject	Posted By	Posted
flange removal thats above crossmember	toysarefun	03/23/07 08:16 PM
Re: flange removal thats above crossmember	fourwd1	03/23/07 08:22 PM
Re: flange removal thats above crossmember	toysarefun	03/23/07 08:33 PM
Re: flange removal thats above crossmember	coryc85	03/23/07 08:53 PM
Re: flange removal thats above crossmember	Elbow_Greese	03/23/07 09:27 PM
Re: flange removal thats above crossmember	OOP'S	03/23/07 10:09 PM
Re: flange removal thats above crossmember	Adam F	03/23/07 10:15 PM
Re: flange removal thats above crossmember	toysarefun	04/05/07 05:40 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.599s Queries: 16 (3.597s) Memory: 0.6067 MB (Peak: 0.6397 MB) Data Comp: Off Server Time: 2026-06-10 07:18:57 UTC
Valid HTML 5 and Valid CSS