Forced Cold air intake.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Forced Cold air intake. [Re: Macka] #799739 03/26/07 03:49 AM

Joined: Sep 2006

Posts: 7

San Diego

sdjeremyv

Need a Spot

you make a spacer and put it between the hood and the hinges. It's usually made with 1" square tubing,

has anyone done this to a gen 1 ?
If so do you have any pictures? I kinda like the idea, however unsure how it would look on a monty.

Entire Thread
Subject	Posted By	Posted
Forced Cold air intake.	Trail_Maker	03/24/07 02:01 PM
Re: Forced Cold air intake.	Macka	03/24/07 02:49 PM
Re: Forced Cold air intake.	sdjeremyv	03/26/07 03:49 AM
Re: Forced Cold air intake.	LandRaider	03/26/07 04:08 AM
Re: Forced Cold air intake.	89montero	03/26/07 05:22 AM
Re: Forced Cold air intake.	LRJ4x4	03/24/07 08:31 PM
Re: Forced Cold air intake.	89montero	03/25/07 04:48 AM
Re: Forced Cold air intake.	generation_one	03/26/07 01:54 PM
Re: Forced Cold air intake.	generation_one	03/26/07 01:58 PM
Re: Forced Cold air intake.	fasteddy	03/26/07 11:51 PM
Re: Forced Cold air intake.	FrankR	03/27/07 12:15 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.462s Queries: 16 (3.460s) Memory: 0.6146 MB (Peak: 0.6476 MB) Data Comp: Off Server Time: 2026-06-02 22:42:08 UTC
Valid HTML 5 and Valid CSS