Quote
i swapped out the large front diff from a sport and all that bolted right up.


I'm real interested in M.Sport to Gen 1 capabilities.
I used M.Sport front calipers.

So you put a M.S. front diff. into a Gen2.
Did you have any problem with the front axles and if so Which axles did you use?
Same ? on front driveshahts.
Putting a high pinion diff in a gen 1 sounds like you might need to do something with the driveshaft. That is if I understand what a H.P. diff carrier would looks like.

I have a 3.0 MT , which is a red headed stepchild 'cause there is something different about MT axles on Gen 1 M.T.s than Gen1 A.T.s ( does somebody know what the difference is?)

Since I can't find a gen 2 rear end or a V5MT1-3 I'm curious about getting a rear with those disc brakes and 4.9 that alldata says comes on 2000 and later 4x4 M.S.s.

I've only seen 2wd M.S., never a 4wd around these parts.

Last edited by KrzyDav; 12/01/08 11:58 PM.