14mm flarenut wrench from crapsman that i had to grind down on side for clearance for the popshaft bolts. A torque wrenc is a must i req. the crapsman one that doesn't have the window in it to read the torque value. my handle slip and now the torque is iffy . have a set of cheap wrenches to modify. a ballpeen hammer. dead blow hamer. punch chisle set
10mm,12mm,14mm,17mm,19mm, swivle sockets. impact gun is nice. 1/2" Breacker bar at least 30"inck long. tread lock high temp. impact extensions(they torque less) air compresser, die grinder, air wrench. gearwrenchs are such a good send. is you replace any bolts with hardware nut factor then you well need the other mm sizes too.