Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Deaver AAL #800727 03/27/07 06:09 AM
Joined: Mar 2007
Posts: 10
T
T100Eric Offline OP
Need a Spot
I got my deaver aal in the mail a couple days ago from wheelers off road and i was wondering how do you put these on. I know that you take out the over load spring but what do you do with the long bolt throught the aal, witch way goes forward on the truck, and do the bolt on the out part of the aal go over the leaf or do they just stay there. Sorry for all the questions Im just a little confused.


1996 T-100 SR5 4x4, BJ Spacer, Deaver AAL, Aisin manual hubs
Re: Deaver AAL [Re: T100Eric] #800728 03/27/07 03:15 PM
Joined: Feb 2005
Posts: 1,489
Jake97T Offline
Body Damage is Cool
match the AAL up to the overload, the orientation will be the same as the AAL since both have an off center hole, the clamps at both ends wrap around the remaining two leafs on your truck and the centering bolt replaces the one that you will brake trying to take it off...after it was all together i had to cut about an inch off the centering pin to reuse the stock bump stop.

What length u-bolts did you get? the 6.75" length are the best.


97 FZJ80, Stock, Factory Lockers.
Re: Deaver AAL [Re: Jake97T] #800729 03/28/07 04:53 AM
Joined: Mar 2007
Posts: 10
T
T100Eric Offline OP
Need a Spot
Yea I got the 6.75" u-bolts after reading your posts


1996 T-100 SR5 4x4, BJ Spacer, Deaver AAL, Aisin manual hubs

Moderated by  4x4Wire, Dandeman, ErikB, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.005s) Memory: 0.5921 MB (Peak: 0.6454 MB) Data Comp: Off Server Time: 2026-06-07 08:43:43 UTC
Valid HTML 5 and Valid CSS