E-locker front intsall

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: E-locker front intsall [Re: scotia] #801097 03/29/07 02:57 AM

Joined: Aug 2001

Posts: 1,520

Wandering around Phoenix

Robinhood150 Offline

Body Damage is Cool

Usually the reason axles won't go in is because of a bent housing. Did the axle come out easily when you took it apart?

Other than that you just need to keep stabbing at it while rotating the pinion a little.

Steve
My Website ||Gettin' off 4wheel drive club member
'93 4Runner V6 4x4 auto tranny
If you have to ask about a SAS, you're not ready for it.

Entire Thread
Subject	Posted By	Posted
E-locker front intsall	scotia	03/28/07 11:38 PM
Re: E-locker front intsall	Staceman	03/29/07 12:40 AM
Re: E-locker front intsall	Robinhood150	03/29/07 02:57 AM
Re: E-locker front intsall	scotia	03/29/07 02:57 PM
Re: E-locker front intsall	Robinhood150	03/29/07 03:13 PM
Re: E-locker front intsall	Staceman	03/29/07 03:20 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 16 (3.492s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-24 21:11:40 UTC
Valid HTML 5 and Valid CSS