I've almost finished putting on my Marlin 4" lift kit, but i've hit a little bit of a road block. When mounting my rear shocks i kept the stock spring hangars that were up on the frame, and mildly relocated the ones that were on the axle. Here is my current setup

(this is my 84 pickup (ext cab)) with the new shocks in the stock locations. The problem is that the shocks, now at ride height, are compressed with only about 4 inches of collapsable length left, as you can see


I'm curious as to better setups. Please post pics, measurements, etc!
thanks
<img src="/forums/images/graemlins/smile.gif" alt="" />