rear wheel bearing - tapered or cylindrical?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: rear wheel bearing - tapered or cylindrical? [Re: mceachrw] #801531 04/01/07 05:13 AM

Joined: Apr 2004

Posts: 310

trooperbc

Mudrunner

for future reference, was this the isuzu part number for the 'kit'
8-97081-945-0

http://www.myisuzuparts.com/part_info_popup.php?part=8-97081-945-0
?
thanks

//bc

1992 sohc trooper 3.2l v6 automatic . . . as is

i love a good intermittent electrical challenge. . .especially when it's someone else's.

Entire Thread
Subject	Posted By	Posted
rear wheel bearing - tapered or cylindrical?	mceachrw	03/30/07 07:28 PM
Re: rear wheel bearing - tapered or cylindrical?	Richard Saylor	03/30/07 07:51 PM
Re: rear wheel bearing - tapered or cylindrical?	mceachrw	03/31/07 08:01 PM
Re: rear wheel bearing - tapered or cylindrical?	trooperbc	04/01/07 05:13 AM
Re: rear wheel bearing - tapered or cylindrical?	mceachrw	04/02/07 05:57 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.542s Queries: 16 (3.539s) Memory: 0.6001 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-06-19 03:31:41 UTC
Valid HTML 5 and Valid CSS