1995 6G72 SOHC need info on rebuild

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1995 6G72 SOHC need info on rebuild [Re: darkroom1428] #801600 04/01/07 12:54 AM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

I think you'll be fine with the block, but the compression will probably be wrong, and the pistons for a 3.0 24v sohc are different than a 3.0 12v sohc (valve reliefs and dish volume).

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
1995 6G72 SOHC need info on rebuild	darkroom1428	03/31/07 05:48 AM
Re: 1995 6G72 SOHC need info on rebuild	fasteddy	04/01/07 12:54 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.541s Queries: 16 (3.539s) Memory: 0.5950 MB (Peak: 0.6280 MB) Data Comp: Off Server Time: 2026-06-04 15:50:02 UTC
Valid HTML 5 and Valid CSS