Copy away! That would be the best form of flattery <img src="/forums/images/graemlins/wink.gif" alt="" />

Mounting....

Using mount points for the factory side steps plus a couple of additional supports to the chassis. Mitsu was nice enough to privide a couple of holes with captive bolts.

The main 2"x2" is mounted butt up against the inside of the rocker seem, lots of surface contact area, and the factory steps are held in by 10 bolts in 3 different directions, lat, vert, and long. We left space on the front for the planed triming to hopefull get 34"~35" tires in,thats if I can find the right wheels. American racing is making a a wheel to fit the H3 now, the "Chamber" 16x8 +20mm offset (5.25" backspacing) that should work but only in chrome, I won't do chrome.

My friend and I have sent them emails asking why they cant coat a few sets in teflon, or just leave them un chromed, but no response yet.

Sorry about not taking pice before mounting them, didn't think about it until after. I will have them down again in a few weeks, when I get back from Charlotte, NC. then I will take and post some pics.