Quote
Quote
ohhh .. and for you guys choosing the steel over the fiberglass...


Steel can be pounded and or pulled out.

Quote
sledge hammer vid on the fiber panel
http://s76.photobucket.com/albums/j2/bj_bumperboy/?action=view&current=sledgehammer.flv


Note that the body panel was not mounted to a vehicle so it could move with the blow. Also the first blow, not shown in the video, did do some damage <img src="/forums/images/graemlins/shiner.gif" alt="" /> and they atleast point that out. I wonder if they had the panel laying flat on the ground for that blow?

-- Bryan

I rolled my truck with CJ's panels, when we pulled it back over, it all popped back out and looked like new.
Fiberglass FTW!

89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim