Looks like i'm going to have to replace a cam.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Looks like i'm going to have to replace a cam. #802309 04/03/07 05:25 AM

Joined: Aug 2006

Posts: 20

Waukegan IL

DangerCart Offline

Need a Spot

I'll cut the story and get sraight to the steak and potatoes. Camshaft bolt sheared off on drivers side cam. I was able to get the broken half out but unfortunately I accidently botched the threads. While I'm in taking eveything apart what else should I do while i'm in there?
I already tried to tap the treads but to no avail. I was about to thread to a larger thread size but I think its best to keep everything stock.

1989 Dodge Raider 3.0L with 5-speed.
In limbo of what to do with it.

Entire Thread
Subject	Posted By	Posted
Looks like i'm going to have to replace a cam.	DangerCart	04/03/07 05:25 AM
Re: Looks like i'm going to have to replace a cam.	MI_Mitsu	04/03/07 03:22 PM
Re: Looks like i'm going to have to replace a cam.	Brianawd	04/03/07 05:35 PM
Re: Looks like i'm going to have to replace a cam.	DangerCart	04/04/07 03:02 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.548s Queries: 15 (3.546s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-06-21 12:28:32 UTC
Valid HTML 5 and Valid CSS