Exh manifolds 4BD2 -> 4BD1T.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Exh manifolds 4BD2 -> 4BD1T. #802313 04/03/07 07:01 AM

Joined: Feb 2005

Posts: 101

Dougal

Wheeler

WIll a 4BD2 exhaust manifold fit a 4BD1T?
I know the bore spacing is the same, but I don't know if the port size and bolt patterns match.

The turbo mounting positions are completely different, but that's all part of my plan.

Entire Thread
Subject	Posted By	Posted
Exh manifolds 4BD2 -> 4BD1T.	Dougal	04/03/07 07:01 AM
Re: Exh manifolds 4BD2 -> 4BD1T.	JLEMOND	04/04/07 02:35 AM
Re: Exh manifolds 4BD2 -> 4BD1T.	Dougal	04/04/07 06:35 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.512s Queries: 15 (3.510s) Memory: 0.5965 MB (Peak: 0.6295 MB) Data Comp: Off Server Time: 2026-06-07 15:54:17 UTC
Valid HTML 5 and Valid CSS