6VD1 engine swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 6VD1 engine swap [Re: Bill_P] #802677 04/05/07 04:12 PM

Joined: Sep 2003

Posts: 1,214

JLEMOND

Body Damage is Cool

YOU WILL NEED TO USE THE COMPLETE INTAKE MANIFOLD AND UPPER ENG ELECTRONICS FOR THE SOHC ENG ON THE DOHC ENG AND IT WILL RUN FINE , THE SOHC ECM WILL NOT RUN THE DOHC ELECTRONICS , COMPLETELY DIFF CONTROLS SYSTEM, DO ASEARCH BACK AWYS ABOUT A YEAR AGO THERE ARE PIX HERE OF THE 95 TROOPER SOHC WHICH HAS A TRANS PLANTED DOHC AND TI RUNS FINE WITH THE SOHC TOP END MANIFOLDING CHECK FOR POST BY LITNIN ,JERRY

Entire Thread
Subject	Posted By	Posted
6VD1 engine swap	Bill_P	04/05/07 03:14 AM
Re: 6VD1 engine swap	JLEMOND	04/05/07 04:12 PM
Re: 6VD1 engine swap	litnin	04/06/07 04:46 AM
Re: 6VD1 engine swap	Bill_P	04/07/07 06:21 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.404s Queries: 16 (3.402s) Memory: 0.5981 MB (Peak: 0.6311 MB) Data Comp: Off Server Time: 2026-06-02 10:24:24 UTC
Valid HTML 5 and Valid CSS