|
|
|
|
Steering Shaft Thru Firewall Gasket
#803405
04/07/07 07:08 AM
|
Joined: Mar 2007
Posts: 21
OP
Need a Spot
|
Read the post about steering shaft gasket rotting out. Sure enough when I checked mine it was rotted also. Went to the dealer ordered the part cost $12.00. I just finished installing it. Only took about 15 min. If you use the steering wheel lock you don't have to worry about the wheel turning. Not that it will anyway. Bolts make it pretty fool proof when putting the shaft back together. Thanks again to the people who share their info. on the T100s <img src="/forums/images/graemlins/kewl.gif" alt="" />
Fix it myself 1997 T100 SR5 4X4 190,000 miles Ext.Cab 5 speed standard All original Except: Bilstein shocks,Steering stabilizer Aisin Hubs
|
|
|
Entire Thread
|
Steering Shaft Thru Firewall Gasket
|
97T100SR54X4
|
04/07/07 07:08 AM
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.462s Queries: 15 (3.459s) Memory: 0.5922 MB (Peak: 0.6252 MB) Data Comp: Off Server Time: 2026-06-10 08:25:59 UTCValid HTML 5 and Valid CSS