97 t100 4x4 Front spindle nut

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 97 t100 4x4 Front spindle nut [Re: 97T100SR54X4] #803417 04/08/07 02:46 PM

Joined: Apr 2001

Posts: 3,466

houston, tx

surlynkid

Roll Me Over

you overtighten it, loosen it a little bit and then torque it down. that is for the inner one. then put that star washer in there and torque the outer one. then bend the tabs on the star washer. use the torque specs in the article.

Scott Landon
1995 T100 - total buildup underway
1988 4Runner (22RE, W56) - new DD
2005 Dodge CTD 4x4 - Tow Beast
1990 Spec Miata
2010 GT3
2013 E92 M3

Entire Thread
Subject	Posted By	Posted
97 t100 4x4 Front spindle nut	97T100SR54X4	04/07/07 07:19 AM
Re: 97 t100 4x4 Front spindle nut	ErikB	04/08/07 04:21 AM
Re: 97 t100 4x4 Front spindle nut	97T100SR54X4	04/08/07 02:34 PM
Re: 97 t100 4x4 Front spindle nut	surlynkid	04/08/07 02:46 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.528s Queries: 16 (3.525s) Memory: 0.5987 MB (Peak: 0.6316 MB) Data Comp: Off Server Time: 2026-06-17 07:20:37 UTC
Valid HTML 5 and Valid CSS