I guess I will have to do it

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: I guess I will have to do it [Re: generation_one] #803515 04/07/07 11:04 PM

Joined: Aug 2003

Posts: 35

Denver, CO

SpideyRaider Offline

Getting the Wheeling Fever

Is the hole in the core or on the top? I had a little leak on top near the cap and used some high temp epoxy and haven't had any issues whatsoever. And the epoxy was only a couple of bucks!

'87 Raider - 2.6L Rebuilt by me, BSE installed.
Superwinch manual hubs. LSD, Squirters and bouncy seat added. Cobra CB w/ PA (PA coming soon). 31x10.5x15 Futura Dakota rubbers; Pro Comp Add-A-Leaf w/ Rancho RS500's in the rear, KYB's up front.

Entire Thread
Subject	Posted By	Posted
I guess I will have to do it	generation_one	04/07/07 08:03 PM
Re: I guess I will have to do it	SpideyRaider	04/07/07 11:04 PM
Re: I guess I will have to do it	LandRaider	04/08/07 12:12 AM
Re: I guess I will have to do it	cmonty72	04/08/07 02:06 AM
Re: I guess I will have to do it	fasteddy	04/09/07 02:10 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.554s Queries: 16 (3.552s) Memory: 0.6015 MB (Peak: 0.6345 MB) Data Comp: Off Server Time: 2026-06-10 05:33:38 UTC
Valid HTML 5 and Valid CSS