squeeking when i turn sharp???

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: squeeking when i turn sharp??? [Re: mountain_warrior] #803574 04/08/07 04:02 AM

Joined: Aug 2003

Posts: 35

Denver, CO

SpideyRaider Offline

Getting the Wheeling Fever

I believe I read that if you put some vaseline on the rubber bump stops it will quiet things down for at least a while, but I personally like to hear when I've reached the limits. It's great on the trail when slowly going over a challenging obstacle... it is a little aural feedback!

'87 Raider - 2.6L Rebuilt by me, BSE installed.
Superwinch manual hubs. LSD, Squirters and bouncy seat added. Cobra CB w/ PA (PA coming soon). 31x10.5x15 Futura Dakota rubbers; Pro Comp Add-A-Leaf w/ Rancho RS500's in the rear, KYB's up front.

Entire Thread
Subject	Posted By	Posted
squeeking when i turn sharp???	mountain_warrior	04/08/07 03:37 AM
Re: squeeking when i turn sharp???	SpideyRaider	04/08/07 03:49 AM
Re: squeeking when i turn sharp???	mountain_warrior	04/08/07 03:59 AM
Re: squeeking when i turn sharp???	SpideyRaider	04/08/07 04:02 AM
Re: squeeking when i turn sharp???	mountain_warrior	04/08/07 04:05 AM
Re: squeeking when i turn sharp???	SpideyRaider	04/08/07 04:18 AM
Re: squeeking when i turn sharp???	mountain_warrior	04/08/07 04:21 AM
Re: squeeking when i turn sharp???	sasnydley	04/08/07 04:54 AM
Re: squeeking when i turn sharp???	Vman	04/08/07 05:22 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: