My Raider is currently in a storage area close to my house so I will get some pictures this weekend. The radiator I used was out of a Ford truck don't remember what year or model. Due to it's size I cut the top radiator/hood support off and used hood posts and pins to keep the hood shut. I also took some of the lower frame out in the front and replaced it with a piece of C channel to get the radiator in lower and provide support for it. Radiator is currently out and front of the motor (alternator, power steering pump, etc.) is currently off in preperation of doing a clean up to get it back road worthy so pictures should show fit pretty good. I will take some underneath pics too to show trans and transfer case fitting. Let me know what other pics you would like to see.