the only thing i didnt like about a carb is the fact it doesnt like upward slopes but ive since been able to tune it a bit better using a 1-4 psi regulator from summit and i dropped my float level down about 5mm from the factory preset level. i run the truck at about 1 psi in the woods and then adjust it to 2 psi on the street, i have a gauge which makes it easy.

heres my thread.

http://www.4x4wire.com/forums/showf...mp;amp;sb=5&o=14&fpart=1

www.fattshack.com

www.blueyfab.com