Need info on ford 9" third member

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Need info on ford 9" third member [Re: sindersblue] #805468 04/16/07 05:02 AM

Joined: Feb 2004

Posts: 1,042

Williamsport, PA

CraShYota

Body Damage is Cool

for the front everything but the third member and the 60 knuckles ill fab. Basicly the axle housing and all the link suspention mounts that get welded on. The rear will be the same diff housing but i havnt decided what kind of rotors i want to use yet so that could change. Ill just get bobby long to make me a set of custom shafts.

-Crash

Welding and Fabrication Engineer
2003 taco V6 ext cab sr5
1988 Toyota Pickup V6(totaled)

Entire Thread
Subject	Posted By	Posted
Need info on ford 9" third member	CraShYota	04/15/07 04:21 PM
Re: Need info on ford 9" third member	sindersblue	04/16/07 03:04 AM
Re: Need info on ford 9" third member	CraShYota	04/16/07 05:02 AM
Re: Need info on ford 9" third member	sindersblue	04/16/07 07:24 PM

Moderated by 4x4Wire, 52degrees, Adam F, Axe Man, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.672s Queries: 16 (3.670s) Memory: 0.5993 MB (Peak: 0.6322 MB) Data Comp: Off Server Time: 2026-06-13 12:56:21 UTC
Valid HTML 5 and Valid CSS