best place to find a exhaust manifold for a gen 1?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: best place to find a exhaust manifold for a gen 1? [Re: blackmage] #805514 04/16/07 04:17 AM

Joined: Mar 2007

Posts: 950

Darts Point, Mississippi - USA

generation_one Offline

Rock Warrior

Quote

shed some light brothas

find a bolt that same size as the sensor.... pound it in the hole with a hammer, or weld it on whichever is works best.

1989 5 door montero 3.0 auto
stock original Japanese
about 200k miles

Entire Thread
Subject	Posted By	Posted
best place to find a exhaust manifold for a gen 1?	blackmage	04/15/07 08:35 PM
Re: best place to find a exhaust manifold for a gen 1?	motero	04/15/07 09:06 PM
Re: best place to find a exhaust manifold for a gen 1?	rxinhed	04/16/07 02:48 AM
Re: best place to find a exhaust manifold for a gen 1?	JonboyJS	04/16/07 03:44 AM
Re: best place to find a exhaust manifold for a gen 1?	MontyMcV	04/15/07 09:31 PM
Re: best place to find a exhaust manifold for a gen 1?	generation_one	04/16/07 04:17 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.480s Queries: 16 (3.478s) Memory: 0.6032 MB (Peak: 0.6362 MB) Data Comp: Off Server Time: 2026-06-24 10:55:36 UTC
Valid HTML 5 and Valid CSS