Jerry,

Thanks for the info....I did have a hole in the MAF to TB hose....I patched it and that did fix the idle problem and it will now idle at 800 rpm or so but it is still only running on 2.5 or so cylinders. While idling I pulled all 4 plug wires one at a time and the #2 and #3 wires had almost no effect while the #1 and #4 would stall the engine.

I found about a .5 by 2 inch piece of plastic missing from where you said it would be and am wondering if that plastic may have been injested into the center 2 cylinders and is blocking an intake or exhaust valve?

I appreciate the help and understand that you all probably have better things to do....

Randy <img src="/forums/images/graemlins/barf.gif" alt="" />