GUESS WHAT. It went around may 1st. I need My truck! Got a clutch kit and trannys on the ground.
Background info:
"I was driving home from akron tonight at about 8, had cruise control set at 70mph going north on 77. all of a sudden the truck putters a little bit and then starts making noise, and had a bad burnt clutch smell. pulled over, checked the belts ans realised it was the clutch. i got her going again, and 5th gear was *****, so u kept it in 4th. got off the highway at the parma/seven hills exit and never stopped all the way to my house. put on the blinkers and jammed the horn through big intersections like broadview and pleasent valley, ridge and pleasent valley, etc, never stopped from when i get her going again on 77 to my driveway where it sits.
I would like to know if u guys know where i can get a cheap clutch kit for it, or the cheapest/best place to take it for repair.
this totally sucks.
truck is a 1996 isuzu rodeo 3.2ltr 4x4."
"it shifts fine into all gears when clutch is pressed, even moves forward, the release bearing went.
oh and as soon as i knew something was wrong i pressed in the clutch and rolled the shoulder as far as it'd go. hope im safe for that quick instinct i had"
original thread:
http://forum.planetisuzoo.com/viewtopic.php?p=76574#76574Todays Update:
got that exedy kit, and trannys on the ground. i turned the input shaft to see what happens, and theres a rattle, i took a crappy video, but the sounds is wht matters.
i did drain all the fluid and my friend (mechanic) said it needs to be aligned straight on the pilot bearing to actually tell anything. what could this noise be? you'll hear me turning the input shaft, but listen to the other ting, its like shaking a can of spray paint?
please look:
http://defused.us/rodeo/MOV00466.MPGneed some quick responses, need my truck on the road!
thanks!
