Gen 1- Rear End Assembly

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Gen 1- Rear End Assembly #807135 04/21/07 06:50 PM

Joined: Apr 2007

Posts: 19

North Bend, WA

RichSmith

Need a Spot

Thanks to the guys on this forum, I was able to identify a Gen 1 Rear End with LSD and pick up the whole thing with brakes, shocks, and leaf springs all still attached for $75.00. Terrific!

Here's my question: The donor 1986 Montero was being parted out and the seller thought Mitsubishi had a deal with FORD back then. He thought it was actually a narrow FORD 9" rear end assembly. Can anyone confirm this or was he mistaken?

Rich Smith

Entire Thread
Subject	Posted By	Posted
Gen 1- Rear End Assembly	RichSmith	04/21/07 06:50 PM
Re: Gen 1- Rear End Assembly	LandRaider	04/21/07 08:29 PM
Re: Gen 1- Rear End Assembly	CapnCrunch	04/21/07 08:49 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.557s Queries: 15 (3.555s) Memory: 0.5962 MB (Peak: 0.6291 MB) Data Comp: Off Server Time: 2026-06-22 18:25:31 UTC
Valid HTML 5 and Valid CSS